Before being able to fly you will need to ARM your drone. This is a simple process that helps ensure no one is accidentally injured due to the blades spinning unexpectedly.


To ARM your drone follow these simple steps;


  1. Power up the drone by connecting the battery.
  2. Wait for the status LED to flash green. This should take no more than 1-2mins. If your status LED isn't flashing green, see Status LED
  3. Once the status LED is flashing green, push and hold the arming switch for two seconds. It should go from flashing red to solid red.
  4. Now simple move your throttle stick all the way to the bottom and hold the yaw stick to the right for 2-3 seconds. You should here a positive tone emitted from the drone, the status LED should go solid green and your motors will start up and spin at idle.